量子位Heisenberg XX开链中边界量子位之间的纠缠

Heisenberg 开链对研究量子态在自旋链上的传递有重要的意义.本文研究了五量子位Heisenberg XX 开链中边界量子位之间的纠缠，在该系统中引入了磁杂质和系统杂质且它们之间满足线性关系时，该系统可以精确求解，此时边界量子位之间存在纠缠.选择合适的杂质参数和磁场参数，该边界纠缠的最大值可达到0.5. 关键词： Heisenberg XX开链 边界纠缠 杂质     

强流脉冲离子束辐照靶及其喷发的数值研究

利用拟合实测的TEMP Ⅱ型加速器磁绝缘二极管(MID)电压波形及其焦点附近束流密度曲线，建立了Gaussian分布模型，据此计算了与靶作用的离子的能量及数量，采用Monte Carlo(MC)方法计算了沉积在靶内的能量.并以此作为热源，与流体动力学(HD)模型相结合，对不同的靶状态采用相应的状态方程，模拟计算了靶内压力演化情况; 同时对烧蚀产生的等离子体采用理想气体状态方程, 结合HD方程组, 模拟计算了喷发过程中压力的空间演化过程. 关键词： 强流脉冲离子束 Gaussian模型 HD方程 数值研究     

一种基于增强现实的室内漫游系统

提出了一种基于增强现实的室内漫游系统,在这个系统中用户通过HMD观察增强的视景。在这个视景中不但包含真实布景的图像,还包含有计算机生成的虚拟物体的图像。为了实现虚实场景之间的注册,在HMD上安装有两个摄像机:场景摄像机与跟踪摄像机。并且在用户所在房间的顶部安装了一系列的红外标志点,这些标志点的图像由跟踪摄像机获取,并通过位置估计算法计算用户头部的位置和姿态。另外,通过一对安装有ARtoolKit标志点的手套,实现用户与虚拟环境之间的交互。最后,一套海底漫系统被开发出来,以验证整个漫游系统的可用性     

Newton-Leibniz integration for ket-bra operators in quantum mechanics and derivation of entangled state representations

Newton-Leibniz integration rule only applies to commuting functions of continuum variables, while operators made of Dirac’s symbols (ket versus bra, e.g., |q〉〈q| of continuous parameter q) in quantum mechanics are usually not commutative. Therefore, integrations over the operators of type |〉〈| cannot be directly performed by Newton-Leibniz rule. We invented an innovative technique of integration within an ordered product (IWOP) of operators that made the integration of non-commutative operators possible. The IWOP technique thus bridges this mathematical gap between classical mechanics and quantum mechanics, and further reveals the beauty and elegance of Dirac’s symbolic method and transformation theory. Various applications of the IWOP technique, including constructing the entangled state representations and their applications, are presented.     

Ethylene–propylene copolymerization with bis(β‐enaminoketonato) titanium complexes activated with modified methylaluminoxane

Ethylene–propylene copolymerization, using [(Ph)NC(R₂)CHC(R₁)O]₂TiCl₂ (R₁ = CF₃, Ph, or t‐Bu; R₂ = CH₃ or CF₃) titanium complexes activated with modified methylaluminoxane as a cocatalyst, was investigated. High‐molecular‐weight ethylene–propylene copolymers with relatively narrow molecular weight distributions and a broad range of chemical compositions were obtained. Substituents R₁ and R₂ influenced the copolymerization behavior, including the copolymerization activity, methylene sequence distribution, molecular weight, and polydispersity. With small steric hindrance at R₁ and R₂, one complex (R₁ = CF₃; R₂ = CH₃) displayed high catalytic activity and produced copolymers with high propylene incorporation but low molecular weight. The microstructures of the copolymers were analyzed with ¹³C NMR to determine the methylene sequence distribution and number‐average sequence lengths of uninterrupted methylene carbons. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5846–5854, 2006     

Double‐hydrophilic block copolymer for encapsulation and two‐way pH change‐induced release of metalloporphyrins

A double hydrophilic block copolymer composed of poly(acrylic acid) (PAA) and poly(4‐vinyl pyridine) (P4VP) was obtained through hydrolysis of diblock copolymer of poly(tert‐butyl acrylate) (PtBA) and P4VP synthesized using atom transfer radical polymerization. Water‐soluble micelles with PAA core and P4VP corona were observed at low (acidic) pH, while micelles with P4VP core and PAA corona were formed at high (basic) pH. Two metalloporphyrins, zinc tetraphenylporphyrin (ZnTPP) and cobalt tetraphenylporphyrin (CoTPP), were used as model compounds to investigate the encapsulation of hydrophobic molecules by both types of micelles. UV–vis spectroscopic measurements indicate that micelles with P4VP core are able to entrap more ZnTPP and CoTPP as a result of the axial coordination between the transition metals and the pyridine groups. The study found that metalloporphyrins encapsulated by the micelles with PAA core could be released on pH increase, while those entrapped by the micelles with P4VP core could be released on pH decrease. This behavior originates from the two‐way pH change‐induced disruption of PAA‐b‐P4VP micelles. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1734–1744, 2006     

Mechanical endurance of polymer electrolyte membrane and PEM fuel cell durability

The life of proton exchange membrane fuel cells (PEMFC) is currently limited by the mechanical endurance of polymer electrolyte membranes and membrane electrode assemblies (MEAs). In this paper, the authors report recent experimental and modeling work toward understanding the mechanisms of delayed mechanical failures of polymer electrolyte membranes and MEAs under relevant PEMFC operating conditions. Mechanical breach of membranes/MEAs in the form of pinholes and tears has been frequently observed after long‐term or accelerated testing of PEMFC cells/stacks. Catastrophic failure of cell/stack due to rapid gas crossover shortly follows the mechanical breach. Ex situ mechanical characterizations were performed on MEAs after being subjected to the accelerated chemical aging and relative humidity (RH) cycling tests. The results showed significant reduction of MEA ductility manifested as drastically reduced strain‐to‐failure of the chemically aged and RH‐cycled MEAs. Postmortem analysis revealed the formation and growth of mechanical defects such as cracks and crazing in the membranes and MEAs. A finite element model was used to estimate stress/strain states of an edge‐constrained MEA under rapid RH variations. Damage metrics for accelerated testing and life prediction of PEMFCs are discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2346–2357, 2006     

Fusion Proteins Cpn10-E^rns with Properties of Generating CSFV-Neutralized Antibodies

IntroductionClassical swine fever(CSF), included in the listA of the Office International des Epizooties(OIE), is ahighly contagious disease of domestic pigs and is con-sidered as the mostharmful disease occurring in pigs allover the world[1]. Outbreaks o…     

A MEMS-Based Piezoelectric Power Generator for Low Frequency Vibration Energy Harvesting

A novel power generator has been achieved to convert vibration to electrical energy via the piezoelectric effect. The generator obtained by micro fabrication process mainly consists of silicon based frame and composite cantilever. The prototype tested at resonant vibration generates 1.15μW of effective power to a 20.4-kΩ resistance load. The potential of this work is to offer miniaturization solutions for power generators, and with the proposed method the ambient ubiquitous vibration can be harvested effectively as endless energy source to form an integrated self-powering system.     

Model and empirical study on some collaboration networks

In this paper we present an empirical study of a few practical systems described by cooperation networks, and propose a model to understand the results obtained. We study four non-social systems, which are the Bus Route Networks of Beijing and Yangzhou, the Travel Route Network of China, Huai-Yang recipes of Chinese cooked food, and a social system, which is the Collaboration Network of Hollywood Actors. In order to explain the results related to the degree distribution, act-degree distribution and act-size distribution (especially about the degree distribution, which may be better fitted using a stretched exponential distribution (SED)), we suggest a simple model to show a possible evolutionary mechanism for the emergence of such networks. The analytic and numerical results obtained from the model are in good agreement with the empirical results.